Advertisement
Advertisement
Table of Contents
Related Manuals for LCG ST-04
Summary of Contents for LCG ST-04
- Page 1 TITAN LIGHTING STANDS ST-04...
- Page 2 LCG PRODUCTS ST-04 User manual 1. INTRODUCTION Thank you for choosing a ST-04 light stand system. This stand has been specially designed to have a very low loading height obtained by a multi-mast configuration. The telescopic masts made of treated steel have been generously sized in order to obtain maximum rigidity, special attention has been placed on security.
- Page 3 LCG PRODUCTS ST-04 User manual Technical data: Maximum load: 200kg Maximum height: 5.5m 18′0″ Minimum height: 1.77m 5′1″ Footprint: 2.17m 7′2″ Weight: 104kg 229lb. Closed size: 1.77m 5′1″ treated steel Material: black epoxy painting / electro-galvanised Finish:...
- Page 4 LCG PRODUCTS ST-04 User manual 3. POSITIONING THE STAND 1): Place the stand in the vertical position on its wheels (J). 2): Ensure that the ground is strong enough to prevent any sinking of the stand into the ground. The stability of the stand is of prime importance for a secure operation.
- Page 5 LCG PRODUCTS ST-04 User manual 4. LIFTING THE MASTS 1): Loosen the top locking knob (G) of the top telescopic mast (smallest). 2): Tighten the another locking knobs to ensure a proper lifting order. The top-mast (smallest) has to be raised first, followed by the bigger mast below in sequence.
- Page 6 LCG PRODUCTS ST-04 User manual 5. ADDING AND LOWERING OF THE LOAD 1): Position a adaptive accessory (truss adapters ST-SA04, T.bars, ect...) on the top mast. Lock the handle of compensation of the to block the accessory on the top mast.
- Page 7 LCG PRODUCTS ST-04 User manual 7. SAFETY NOTES! • Carefully inspect all parts before each use. • Obey the factory guidelines concerning the load limits as well as the safety codes of material and staff. The choice of trussing and the stand capacity must be adapted to the load.
Need help?
Do you have a question about the ST-04 and is the answer not in the manual?
Questions and answers