Wireless Antenna Kit; Internal Antenna Kit - Dell OptiPlex Tower 7010 Owner's Manual

Steps
1. Insert the power-button cable into the slot from the front-side of the computer, and press the power-button head until it
clicks into the place in the chassis.
2. Align and connect the power-button cable to the connector on the system board.
Next steps
1. Install the front bezel.
2. Install the side cover.
3. Follow the procedure in

Wireless antenna kit

Internal antenna kit

Removing the internal antenna kit
CAUTION: The information in this section is intended for authorized service technicians only.
Prerequisites
1. Follow the procedure in
2. Remove the side cover.
3. Remove the front bezel.
About this task
The following images indicate the location of the internal antenna and provides a visual representation of the removal procedure.
78 Removing and installing Field Replaceable Units (FRUs)
after working inside your
Before working inside your
computer.
computer.