Advertisement
12) To adjust the bottom right purity, press the
13) When the bottom right purity is adjusted, press the
to return to the EXTRA CONTROLS window. BACK TO MAIN
CONTROLS is highlighted.
Smart Help
After returning to EXTRA CONTROLS . . .
. . . to continue to ADJUST PURITY, press the
CALIBRATE is highlighted. Next, start with step 4 under EXTRA
CONTROLS - AUTO CALIBRATE.
. . . to exit completely, press the
Back
OSD Adjustments (Continued)
or
button.
button
button until AUTO
button twice.
ADJUST MOIRE (Not available in all models)
EXTRA CONTROLS is a set of three features, including ADJUST
MOIRE. Moire is a fringe pattern arising from the interference between
two superimposed line patterns. To adjust your moire, follow the steps
below. Note: Use only if necessary. By activating ADJUST MOIRE,
sharpness can be affected.
1) Press the
button on the monitor. The MAIN CONTROLS window
appears.
2) Press the DOWN CURSOR button until EXTRA CONTROLS is
highlighted.
3) Press the
button. The EXTRA CONTROLS window appears.
DEGAUSS will be highlighted.
4) Press the
button until ADJUST MOIRE is highlighted.
5) Press the
button. The ADJUST MOIRE window appears.
HORIZONTAL will be highlighted.
6) To adjust the horizontal moire, press the
13
107P2 CM 25 GSIII
Go to cover page
or
button.
Forward
Advertisement
