Advertisement
54
107P2 CM 25 GSIII
Go to cover page
3.7
3.8
3.9
3.10 Low emission requirements (MPRII, TCO95, TCO99)
3.11 Display data channel : DDC1/2B (VESA STANDARD)
00-06-07
K.C. Huang
Back
GENERAL PRODUCT SPECIFICATION
Variation of image size
Due to brightness change
from 3 to 30 FL (Max.)
: < 1.0 %
Due to aging
(0 to 40 °C)
: < 1.0 %
Due to mains voltage
variation
: < 1.0 %
Degaussing
An automatic degaussing circuit is provided which req-
uires no intervention. The degaussing activated at the
time of switch -on or switch-on again or pressing manual
degaussing key after switch ing-off degaussing circuits
for longer than 30 minutes.
Phosphor protection
The display device is sufficiently protected against the
burning of phosphors in case of repetitive powe r cycling
or absence of horizontal deflection.
Items
Band I
ELF (rms)
Alternating Electric
MPR-II £ 25 V/M
Field
TCO-95/99£10
Magnetic Field
MPR-II £ 250 nT
TCO -95/99£ 200 nT TCO-95/99£25 nT
E.S.P
Band I : 5 to 2K Hz.
Band II : 2K to 400K Hz.
Test procedure according to Low emission test method.
The DDC HEX Data should be written into DDC memory inside
the IC (7804 by EEPROM writer or equivalent method.
CM25-17" 107P2 92KHz AR CRT
TYPE
: 107P20/00H
BRAND : PHILIPS
00-06-07
Band II
VLF (rms)
MPR-II £ 2.5V/M
TCO-95/99£1.0
MPR-II £ 25 nT
£ ± 500 V
8639 000 10649
590
23
10
Forward
Advertisement
