Advertisement
3) Press the
button. The INPUT SIGNAL SELECTION window
appears.
4) Press the
or
button to highlight INPUT B or INPUT A.
5) Press the
button to confirm your selection and return to the MAIN
CONTROLS window. CLOSE MAIN CONTROLS will be highlighted.
Smart Help
After returning to MAIN CONTROLS . . .
. to continue to ZOOM, press the
Next, follow steps 3 - 5 under ZOOM.
. . . to exit completely, press the
ZOOM
ZOOM increases or decreases the size of the images on your screen.
To adjust the ZOOM follow the steps below.
1) Press the
button on the monitor. The MAIN CONTROLS window
appears.
2) Press the
button until ZOOM is highlighted.
3) Press the
button. The ZOOM window appears.
4) Press the
or
button to adjust ZOOM.
5) Press the
button to confirm your selection and return to the MAIN
CONTROLS window. CLOSE MAIN CONTROLS will be highlighted.
Smart Help
After returning to MAIN CONTROLS . . .
. . . to continue to ADJUST HORIZONTAL, press the
ADJUST HORIZONTAL is highlighted. Next, follow steps 3 - 7 under
ADJUST HORIZONTAL.
. . . to exit completely, press the
ADJUST HORIZONTAL
ADJUST POSITION under ADJUST HORIZONTAL shifts the image on
your screen either to the left or right. Use this feature if your image
does not appear centered. ADJUST SIZE under ADJUST
HORIZONTAL expands or controls the image on your screen, pushing it
out toward the left and right sides or pulling it in toward the center.
1) Press the
button on the monitor. The MAIN CONTROLS window
appears.
2) Press the
button until ADJUST HORIZONTAL is highlighted.
Back
OSD Adjustments
button until ZOOM is highlighted.
button
button until
button
3) Press the
button. The ADJUST HORIZONTAL window appears.
ADJUST POSITION should be highlighted.
4) Press the
or
button to move the image to the left or right.
5) When the position is adjusted, press the
CONTROLS window, or press the
6) To adjust the horizontal size, press the
7) When the size is adjusted, press the
CONTROLS window. CLOSE MAIN CONTROLS will be highlighted.
Smart Help
After returning to MAIN CONTROLS . . .
. . . to continue to ADJUST VERTICAL, press the button until ADJUST
VERTICAL is highlighted. Next, start with step 3 under ADJUST
VERTICAL and follow the directions.
. . . to exit completely, press the
ADJUST VERTICAL
ADJUST POSITION under ADJUST VERTICAL shifts the image on
your screen either up or down. Use this feature if your image does not
appear centered. ADJUST SIZE under ADJUST VERTICAL expands or
controls the image on your screen, pushing it out toward the top or
bottom or pulling it in toward the center.
1) Press the
button on the monitor. The MAIN CONTROLS window
appears.
107P2 CM25 GSIII
7
Go to cover page
button to return to MAIN
to highlight ADJUST SIZE.
or
button.
button to return to MAIN
button
Forward
Advertisement
