Advertisement
4) Press the
or
button to select YES or NO. NO is the default. YES
returns all settings to their original factory adjustments.
5) Press the
button to confirm your selection and return to the MAIN
CONTROLS window. CLOSE MAIN CONTROLS will be highlighted.
Smart Help
After returning to MAIN CONTROLS . . .
. . . to continue to EXTRA CONTROLS, press the
CONTROLS is highlighted. Next, start with step 3 under EXTRA
CONTROLS.
. . . to exit completely, press the
EXTRA CONTROLS
DEGAUSS
EXTRA CONTROLS is a set of three features, including DEGAUSS.
Degaussing removes electromagnetic build up that may distort the color
on your screen.
1) Press the
button on the monitor. The MAIN CONTROLS window
appears.
2) Press the
button until EXTRA CONTROLS is highlighted.
3) Press the
button. The EXTRA CONTROLS window appears.
DEGAUSS will be highlighted.
4) To degauss your screen, press the
degaussed, then the MAIN CONTROLS window will reappear. CLOSE
MAIN CONTROLS will be highlighted.
Smart Help
After returning to MAIN CONTROLS . . .
. . . to continue to ADJUST MOIRE, press the
CONTROLS is highlighted. Next, start with step 3 under EXTRA
CONTROLS, ADJUST MOIRE.
. . . to exit completely, press the
Back
OSD Adjustments (Continued)
button until EXTRA
button.
button. Your screen will be
button until EXTRA
button.
ADJUST CONVERGENCE
(Not available in all models)
EXTRA CONTROLS is a set of features, including ADJUST
CONVERGENCE. Convergence is a process by which a color is
created by blending other colors. For example, white is created by
blending red, blue, and green. If these colors do not completely blend
together (converge) then you may see unwanted red, green, or blue
lines or dots. To adjust the convergence, follow the steps below. Note:
Use only if necessary. Remember: you must degauss the monitor
BEFORE adjusting the convergence.
1) Press the
button on the monitor. The MAIN CONTROLS window
appears.
2) Press the
button until EXTRA CONTROLS is highlighted.
3) Press the
button. The EXTRA CONTROLS window appears.
DEGAUSS is highlighted. Note: If you have not degaussed the monitor,
please follow the steps under the Extra Controls - Degauss section of
this manual before adjusting the convergence.
4) Press the
button until ADJUST CONVERGENCE is highlighted.
5) Press the
button. The ADJUST CONVERGENCE window
appears. ADJUST HORIZONTAL is highlighted.
6) To adjust the horizontal convergence, press the
107P2 CM25 GSIII
11
Go to cover page
or
button.
Forward
Advertisement
