Siemens Gigaset 4010 User Manual page 27

Press Keys:

NNNNNNN
 
NNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNN
C LOG
 
NNNNNNN NNNNNNN


NNNNNNN
 
NNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNN
C LOG
 
NNNNNNN NNNNNNN
NNNNNNNNNNNN
MENU
 
NNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNN
DELETE
Enhanced Telephone Features
Calling from Call Log
When your Local Area Code and any Extra Codes
have been stored in your telephone, it will behave
as described below in the case of a call from the call
log list:
Single Area Code Area (Local Area Code and no
Extra Code are stored)
If the Area Code of the call log entry is identical to
the stored Local Area Code, only the 7digit DID
number will be dialed. A "1" will otherwise be pre-
fixed to the call log entry number.
Multiple Area Code Area (Local Area Code and
Extra Code(s) are stored)
If the Area Code of the call log entry is identical to
the stored Local Area Code or one of the Extra
Codes, the call log entry will be dialed unchanged.
A "1" will otherwise be prefixed to the call log entry
number.
Important: There are certain exceptional
cases (such as a long distance call despite
the same Area Code, Metro Numbers) which
are not covered by this check. In these cases
please dial the correct number manually.
Open the Call Log.
Scroll to Call Log and press OK.
Scroll to the telephone number.
Press the Talk key.
Deleting Number from Call Log
Open the Call Log.
Scroll to Call Log and press OK.
Scroll to the telephone number.
Open the Menu.
Select Delete and press OK.
21