Attaching The Belt Clip - Siemens Gigaset 4010 User Manual

Press Keys:
Installing the Telephone System
Leave the handset for about 12–14 hours in the
base station to charge the batteries. The charging
status symbol flashes on the handset, indicating
that the batteries are being charged:
K
Batteries empty
(symbol flashes)
J 1
Batteries /
3
charged
• Once the initial charging operation is com-
pleted, replace your handset into the base
station after each call. Charging is con-
trolled electronically. This ensures opti-
mum charging and prolongs battery life.
• The batteries heat up during charging. This
is normal and not dangerous.
• The battery charging status is correctly dis-
played only after uninterrupted charging/
discharging. You should therefore avoid
opening the battery compartment unnec-
essarily.

Attaching the Belt Clip

Push the belt clip onto the back of the handset until
the tabs click into place.
I 2
Batteries /
3
charged
H
Batteries fully
charged
5