Advertisement
Inflate the bladder.
Immerse the bladder in water, check for air bubbles to locate the leak. Dry area
surrounding the puncture and using a marker pen draw a circle around it.
16
21
/
Fully deflate the bladder, sand down the area around the puncture using the sandpaper
provided and clean with alcohol.
Place the bladder on a smooth flat surface and stick a repair patch over the puncture.
Reinflate the bladder to check it is fixed properly.
Deflate the bladder and reattach the lines to the tips using a larks head before inserting
it back, use the lines to pull it back into the position. Be careful that there are no twists
in the bladder
Once in position pull the inflation valve back through and reattach the inflation valve
cap. Remove the lines from around the bladder and close the tips.
17
21
/
EN
Advertisement
