Quantum TRINITY F90+ User Manual page 43

Create Map Create Map
Offline maps are generated based on the informa- Offline maps are generated based on the informa-
tion of the online maps. During the creation process tion of the online maps. During the creation process
QBase needs to be connected to the internet. QBase needs to be connected to the internet.
1. Select Pan To in the left section and search for the 1. Select Pan To in the left section and search for the
area that you wish to create the offline map of or area that you wish to create the offline map of or
zoom to the desired location. zoom to the desired location.
2. Boundaries are marked with a green rectangle. 2. Boundaries are marked with a green rectangle.
Please add some margin between the boundar- Please add some margin between the boundar-
ies of the offline map and the desired flight area. ies of the offline map and the desired flight area.
It is possible to switch between horizontal and It is possible to switch between horizontal and
vertical orientation. vertical orientation.
3. The Max. Zoom (maximum level of detail) is di- 3. The Max. Zoom (maximum level of detail) is di-
splayed in the top left corner. In order to change splayed in the top left corner. In order to change
it please use the scroll bar in the right panel. it please use the scroll bar in the right panel.
Recommended zoom level: 17 – 18. Recommended zoom level: 17 – 18.
4. Set a name for the offline map. 4. Set a name for the offline map.
5. Select Download in order to save the offline map. 5. Select Download in order to save the offline map.
If the Download button is disabled either decrea- If the Download button is disabled either decrea-
se the Max. Zoom (maximum level of detail) or se the Max. Zoom (maximum level of detail) or
decrease the area of the offline map. decrease the area of the offline map.
The map is saved in Documents > QBase > Maps. The map is saved in Documents > QBase > Maps.
Map Layer
It is possible to import a custom map layer. The for-
mat needs to be a .tif file.
Please instert the corresponding file into Documents
> QBase > Maps > Layers.
Post-Processing FlyLog debrief
Geotagging the pictures with the accurate PPK FlyLogs are generated during the flight and saved
coordinates. Please see chapter 7.4.3 on the autopilot board of the aircraft. Please
download the FlyLog from the UAV for the further
Import KML processing.
Import your KML file to improve your mission
planning. Import KML
Import your KML file to improve your mission
SD Card planning.
See chapter 7.4.3
SD Card
See chapter 7.4.3
Calibration
Calibrate the magnetometer and accelerometer.
UAV Diagnosis
iBase Converter The autopilot will start an internal diagnosis of the
Convert the iBase Log file to Rinex 2.11 sensors and parameters. The diagnosis file will be
saved on the SD card as 'SYSLOG'.
Geo Tagging
QBase offers the possibility to geotag the pictures
that were taken during the mission with geodata.
This enables the user to post-process the pictures
with the help of a photogrammetry software.
QBase – Ground Control Station
Trinity F90+ user manual 43
7