Keep Your Uav And The Equipment Clean; Check The Uav For Damages; Check All Connections; Clean The Airspeed Sensor - Quantum TRINITY F90+ User Manual

13.5.2 Keep your UAV and the equipment clean

• Please clean the parts of the UAV and all additional equipment with a slighty moist cleaning tissue.
• Clean the transportation box with the help of a vacuum cleaner.
It is recommended to perform the following steps outside. Furthermore, a short mission must be planned.

13.5.3 Check the UAV for damages

• Please carefully inspect every part of the UAV for damages.
• Thereby, please also check the propellers for dents, cracks and scratches.

13.5.4 Check all connections

• Please assemble the unit and make sure that all lock mechanisms are locked correctly.
• Do not connect the battery.
Elevator
WRONG

13.5.5 Clean the Airspeed Sensor

• Please remove the airspeed sensor from the main body via the magnetic connection.
• Please use compressed air in order to clean the sensor. The sensor can be cleaned from both directions. To finish the
process please make sure that no more dust or dirt is visible inside the tube
Only relevant for UAV's delivered as of Q2 2021 starting with serialnumber 00686.
146 Trinity F90+ user manual
Elevator
CORRECT
Wing / Rear F uselage / Nose
WRONG
Wing / Rear Fuselage / Nose
CORRECT