Raider RD-CBL04 User Manual page 10

10 www.raider.bg
1. General instructions for safe operation.
Read all instructions. Failure to follow the instructions may result in electric shock, fire and / or
serious injury. Keep these instructions in a safe place.
1.1. Safety in the workplace.
1.1.1. Keep work area clean and well lit. Cluttered and inadequate lighting may contribute to the
occurrence of accidents.
1.1.2. Do not operate the battery device for blowing in environments with increased danger of
explosion, close to flammable liquids, gases or dust.
During operation of the battery device for blowing may create sparks that can ignite the dust
or fumes.
1.1.3. Keep children and bystanders away while operating a battery device for blowing.
If your attention be diverted, you may lose control over the battery meter blowing.
1.2. Safety when working with electricity.
1.2.1. Plug the charger must be suitable for use contact. In no case be allowed to modify the
plug. When working with zeroed appliances do not use adapters plug.
Unmodified plugs and sockets reduce the risk of electric shock.
1.2.2. Protect the battery device for blowing rain and moisture.
Water entering a battery device for blowing increases the risk of electric shock.
1.3. Safe way of working.
1.3.1. Be alert, watch carefully their actions and act cautiously and wisely. Do not use the
battery unit for blowing when you are tired or under the influence of drugs, alcohol or medication.
A moment of inattention while operating battery device for blowing can have the effect of
severe injuries.
1.3.2. Use personal protective clothing and always wear eye protection.
Wearing suitable for use cordless device for blowing and activity carried personal protective
equipment such as dust mask, healthy tightly closed shoes with a stable tread protective helmet
and silencers (earplugs) reduces the risk of accident.
1.3.3. Avoid the danger of inclusion of the battery unit for blowing inadvertently. Carrying
battery device for blowing your finger on the switch, there is a risk of accident.
1.3.4. Do not overreach. Work in a stable body position and at any time maintain balance. So
you can control the battery unit for blowing better and safer unexpected situations.
1.3.5. Dress properly. Do not operate with loose clothing or jewelry. Keep your hair, clothing
and gloves away from moving parts of the battery unit for blowing. Loose clothes, jewelery or long
hair can be caught in the chuck.
1.4. Care of the battery unit for blowing.
1.4.1. Do not overload the battery meter blowing. Use battery device for blowing only according
to its purposes. You will work better and safer when using the appropriate cordless device for
blowing in specified by the manufacturer load range.
1.4.2. Keep the battery device for blowing of places can not be reached by children. Do not
allow it to be used by persons who are not familiar with how to operate it and not read these
instructions. When in the hands of inexperienced users, the battery unit for blowing can be
dangerous.
1.4.3. Keep the battery device for blowing care. Check that the mobile units are functioning
flawlessly, if not spells that have broken or damaged parts that violate or alter the functions of
the battery unit for blowing. Before using the battery device for blowing damaged, have the tool
repaired. Many accidents are caused by poorly maintained power tools.
1.4.4. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
edges are less resistance and working with them easier.
1.4.5. Use battery meter blowing, attachments and tools, according to the manufacturer's
instructions. Respecting and specific working conditions and operations that must follow. Using
a cordless device for blowing other than those intended increases the risk of occurrence of
accidents.
1.5. Instructions for safe handling specific to your purchased cordless device for blowing.
Attention! Loss of control over the power tool may result in the occurrence of accidents.
1.5.1. Do not use accessories that are not recommended by the manufacturer specifically for
this power tool. The fact that you can attach to the machine definitely accessory or working tool,
not ensure safe handling.