Table of Contents
Advertisement
Section 6: Electrical System
When you are ready to leave, reverse the power cord connection process. Use care to prevent
damaging the power cord electrical connection pins when connecting or disconnecting the
shore power cord. Grasp the plug to remove the power cord from the outlet; do not unplug
it by pulling on the cord.
Maintenance
Inspect the power cord for cuts, cracks and worn insulation. Have the power cord replaced
immediately if these symptoms are noticed.
Inverter
A factory installed inverter converts 12-volts
DC to useable 120-volts AC and supplies AC
power to the appliance plugged into it. It is im-
portant that you familiarize yourself with the
inverter function and operation. The inverter
should be "off" when not in use.
™ NOTE: The inverter is not intended
for use, nor should be used, with any
medical device(s). The inverter may,
however, be used with some CPAP ma-
chines, depending on the CPAP mod-
el. Consult your CPAP machine's in-
struction manual before use to ensure
proper operation.
The inverter has a remote display panel which provide many features:
Feature
Description
Display panel displays status information on the screen. It is comprised of
1
a display screen, LEDs, select and power buttons.
Multi-function LCD screen shows status information and error codes.
2
3
Status LEDs indicate the mode of operation.
4
Three function buttons change status information displayed on the
screen. Also, changes inverter settings.
5
Power button is pressed for turning on the unit. The inverter turns on for
the loads automatically.
Status LED Indicators
Indicator
Definition
Solid green. Indicates grid mode in which shore power is available and
passing through to the loads.
Solid green. Indicates Battery mode (Inverter mode) in which the in-
verter is running and supplying power to the loads from the battery.
Solid red. Indicates error or fault mode and is accompanied by an error
code displayed on the LCD screen.
56
Table of Contents
Advertisement
Table of Contents
