Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Bestway POWER STEEL 56622E
Summary of Contents for Bestway POWER STEEL 56622E
- Page 1 WE SUGGEST NOT TO RETURN THE PRODUCT TO THE STORE QUESTIONS? PROBLEMS? MISSING PARTS? For FAQ, Manuals, Videos Or Spare Parts, Please Visit bestwaycorp.com/support POWER STEEL™ OVAL POOLS OWNER’S MANUAL Para la instrucción en español, visite bestwaycorp.com/support Visit Bestway YouTube channel...
- Page 2 WARNING smooth out the bottom Put 1in. to 2in. water in the pool to cover the floor. Once pool floor is slightly covered, gently smooth out all wrinkles. Start in the center of the pool and work your way clockwise to the outside. Do not assemble on soft lawn.
-
Page 3: Important Safety Instructions
WARNING Prevent Young Children From Gaining Access to Pool: Remove pool ladders before leaving pool. Toddlers can climb IMPORTANT SAFETY INSTRUCTIONS ladder and get into pool. Read and Follow All Safety Information and Position furniture away from pool so that children cannot climb and gain access to pool. - Page 4 8. Access gates to the pool should comply with Section I, Keep all electrical radios, speakers and other appliances away Paragraphs 1 through 7,and should be equipped to from the swimming pool. accommodate a locking device. Pedestrian access gates When you touch the filter, pump, or electrical parts, be sure the should open outward, away from the pool, and should be ground under your feet is “Bone Dry.”...
- Page 5 APSP-8. the total weight for the entire time the pool is installed. When Basic lifesaving equipment, including one of the following, shall choosing the surface, take into consideration that water may be on hand at all times: a. A light, strong, rigid pole (shepherd’s come out of the pool when in use or in the rain.
- Page 6 COMPONENTS LIST NOTE: Some parts already have been installed on the pool. 10 ft. x 6 ft. 7 in. x 33 in. 14 ft. x 8 ft. 2 in. x 39.5 in. 16 ft. x 10 ft. x 42 in. 18 ft.
-
Page 7: Installation
Talcum Powder before assembly. Talcum Powder is not included and easily available in the market. Bestway will not be responsible for damage caused to the pool due to mishandling or failure to follow these instructions. 1. Lay out all parts and check that you have the correct quantities as listed in the components list. -
Page 8: Connection Valve Assembly
1. Fill the pool until the water reaches the welding line located 4.7in.-7.9in. (12cm-20cm) from the top of the pool. DO NOT OVERFILL as this could cause the pool to collapse. In times of heavy rainfall you may need to empty some of the water to ensure the level is correct. - Page 9 IMPORTANT: Add chemical liquid in small doses and in the center of the pool to avoid direct contact between the chemicals and the PVC surface. Direct contact can damage the material and discolor the surface. NOTE: Remove the chemical dispenser from pool when the pool is in use. IMPORTANT: After performing chemical maintenance and before using the pool, use a test kit (not included) to test the water chemistry.
- Page 10 Distributed in Australia & New Zealand by Bestway Australia Pty Ltd, Unit 2/98-104 Carnarvon St Silverwater, NSW 2128, Australia Tel: Australia: (+61) 29 0371 388; New Zealand: 0800 142 101 Distributed in United Kingdom by Bestway Corp UK Ltd. 8 Wentworth Road, Heathfield Industrial Estate, Newton Abbot, Devon, TQ12 6TL Exported by/Exporté par/Exportado por/Exportiert von/Esportato da Bestway (Hong Kong) International Ltd./Bestway Enterprise Company Limited...
Need help?
Do you have a question about the POWER STEEL 56622E and is the answer not in the manual?
Questions and answers