Working In Manual Mode - AEG CLG330 Instruction Manual

WORKING IN MANUAL MODE

In manual mode the cross lasers self-leveling mechanism is disabled and the laser lines can
be set at any slope required.
1
Place the cross laser on a solid
fl at vibration free surface or on a
tripod.
2
Press the manual mode button
(do not slide the locking switch!).
The red LED next to it will light
up.
3
Same as in the self-leveling
mode, the cross laser will
generate 3 laser beams, but the
laser beams are interrupted
every 3 seconds.
3 sec. 3 sec. 3 sec.
ENGLISH
4
Choose the beams that you want to
work with by pressing the V/H beam
button.
5
Tilt the laser using the
adjustable folding legs and
adjust to the desired angle and
height.
6
To turn the Manual mode off ,
press again the Manual button.
It is possible to switch directly
to the self-leveling mode by
sliding the locking switch to
ON position.
7