Maintenance; Technical Data; Specific Conditions Of Use - AEG CLG330 Instruction Manual

MAINTENANCE

Wipe the aperture lens and the body of the cross laser with a clean soft cloth. Do not use
solvents.
Although the cross laser is dust and dirt resistant to a certain degree, do not store in dusty
places as long term exposure may damage internal moving parts.
If the cross laser is exposed to water, dry the laser level before returning it to the carrying case
to prevent corrosion damage.

TECHNICAL DATA

Laser Class
Self-Leveling Range
Self-Leveling Time
Battery technology
Voltage DC
Power input
Protection class (water and dust
protection)
Functions
Pulse Mode
Projections
Laser beams output pattern
Operating time
Tripod mount
Suitable detector
Laser Line
Width 2.5 mm ± 0.5 mm / 5 m
Wavelength λ 520 ± 10 nm Laser Class II
Accuracy ± 0.2 mm/m
Fan angle > 120°
Colour green
Working Range 30 m (with detector 50 m)
ENGLISH
2
± 3°
3 - <5s
LR6 Alkaline AA battery
3 x 1.5 V
0.35 A
IP54
horizontal, 2x vertical, cross line, plumb function
Frequency 10 kHz
3 lines green, 1 point red
Horizontal beam forward, vertical beam forward, side
vertical beam and plumb dot.
Horizontal and forward vertical cross beams and plumb
dot.
Horizontal beam.
Forward vertical beam and plumb dot.
Forward and side vertical beams and plumb dot. (the
plump down point is only working in self-leveling mode
and not in manual mode).
6 hrs
1/4" thread
for standard green multiline lasers
Laser plumb
Laser point wavelength 635 ± 5 nm Laser Class II
Laser point max. power < 1 mW
Plumb accuracy ± 0.6 mm / 1 m
Laser point colour red
Working Range 5 m
Recommended ambient operating
temperature
Storage Temperature
Dimensions
Weight (incl. Battery)

SPECIFIC CONDITIONS OF USE

The laser is innovatively designed for a very broad range of professional jobs, including:
- Aligning tiles, marble, cabinets, borders, moldings and trimmings
- Marking layout for doors, windows, rails, stairs, fences, gates, decks and pergolas installation.
- Transferring reference point for light installations, vents, transfer of heights, levelling perimeter
walls, wall studs, setting out tracks on fl oors and all other professional use.
- It is intended for determining and checking horizontal and vertical lines.
Do not use this product in any other way as stated for normal use.
-10°C - +45 °C
-20°C - +60 °C
106 mm x 88 mm x 105 mm
710 g
2