Working In Self-Leveling Mode - AEG CLG330 Instruction Manual

WORKING IN SELF-LEVELING MODE

In self-leveling mode the cross laser will level itself in a ±3° range and can project a
horizontal beam, two vertical beams or all 3 beams simultaneously.
1
Place the cross laser on a solid
fl at vibration free surface or on a
tripod.
2
Slide the locking switch to the
ON position.
3
The cross laser will generate
3 laser beams.
(A) vertical beam forward
(B) side vertical beam
(C) horizontal beam forward
(D) Laser point (plumb)
The cross laser will generate
upwardcross beams (E) and
forward cross (F) beams when all
beams are activated.
ENGLISH
1/4" male thread
E
A
F
C
D
4
Choose the beams that you want to
work with by pressing the V/H beam
button
5
If the initial level of the cross laser is
beyond ± 3° and the self-leveling
mode is activated, the laser beams
will fl ash
B
alarm will be heard.
In this case reposition the cross laser.
6
Before moving the cross laser, slide
the locking switch the OFF
This will lock the pendulum and
protect your cross laser.
> 3°
> 3°
and a beeping
position.
> 3°
beep
6