Answering With The Fax's Handset - Sharp UX-P100 Operation Manual

Using TEL Mode

Answering with the fax's handset

1
When the fax machine rings, pick up
the handset.
2
If you hear a fax tone, wait until the
display shows RECEIVING and then
replace the handset.
3
If the other party first speaks with you
and then wants to send a fax, press
START/MEMORY
after speaking. (Press before
the sender presses their Start key.)
•
When RECEIVING appears in the
display, hang up.
Answering on an extension phone connected to the same
line
1
Answer the extension phone when it
rings.
48
Note: If you have set the Fax Signal Receive
setting to NO, press
START/MEMORY
Beep
START/MEMORY
to begin reception.