Setting The Date And Time - Sharp UX-P100 Operation Manual

Setting the Date and Time

Setting the Date and Time
The date and time appear
in the display and are
printed at the top of every
page you fax. Set the date
and time as shown below.
STOP
START/MEMORY
1
FUNCTION
Press
2
Press
3
Press
4
Enter a two-digit number for the month ("01" for January, "02" for
February, "12" for December, etc.).
Example: January
•
To correct a mistake, press
then enter the correct number.
5
Enter a two-digit number for the day ("01" to "31").
Example: the 5
18
FUNCTION
once and
once and once.
0 1
th
0 5
1 2 3
4 5 6
7 8 9
0
twice.
Display:
The currently set date
appears (example):
to move the cursor back to the mistake and
Do not set the date
and time if you are
using OpenLCR!
OpenLCR
automatically sets the
date and time each
time your fax calls
OpenLCR and
receives rate data. To
ensure accurate use
of the rate data, do not
change the date and
time setting yourself.
ENTRY MODE
DATE&TIME SET
DATE 08-15-2001
DATE 01-15-2001
DATE 01-05-2001