Sharp UX-P100 Operation Manual page 26

Setting Up and Using OpenLCR
Registering by fax
To register by fax, fill in the Fax Transmission Test and OpenLCR Line
Activation Form, and then fax the form as follows:
1
Place the form with the side you wrote
on face down, and push it gently into
the document feeder of the fax
machine.
2
OpenLCR
Press
•
Your fax automatically calls OpenLCR and sends the form. After the form
is sent, your fax will automatically receive the rate data. When downloading
is completed, the display will briefly show DOWNLOAD OK!! and then
revert to the date and time. Your fax will print out the registration form to
confirm that it was received.
•
OpenLCR will also program the date and time and your fax number in your
fax machine.
Registering by phone
To register by phone, follow these steps:
1
Pick up the handset on the fax
machine.
2
OpenLCR
Press
24
START/MEMORY
, , and then
5
and then .
1
READY TO SEND
.