Blocking Reception Of Unwanted Faxes - Sharp UX-P100 Operation Manual

Blocking Reception of Unwanted Faxes

STOP
4
Press
5
Set the reception mode to FAX.
♦
When using distinctive ring, you must set the reception mode of your fax
machine to FAX. When your designated fax number is dialed, your fax will
automatically answer and begin reception after two rings. Note that other
devices on the same line will also ring until your fax answers. If one of your
other numbers is dialed, the fax will ring; however, it will not answer.
1
Press
2
Press
3
Press
4
Press
stored number (if you are clearing a number, go to Step 6).
5
Enter the fax number by pressing the number keys (max. 20 digits).
6
Press
display.
60
to return to the date and time display.
once and
ss
once and twice.
once.
to store an Anti Junk number, or
and then press
twice.
to return to the date and time
to clear a previously