Performing A Manual Card Entry - Heartland Ingenico Move Manual

Performing a manual card entry

In the event that the PINpad is unable to read a credit/debit card, you can manually enter the card information by
following the steps below.
1. After you've added items to an invoice and
selected Credit in CRE, the PINpad will
prompt you to Tap/Insert/Swipe a card, as
depicted in this image.
2. Using the keypad on the device, enter the
card number and press the green button.
3. When prompted, Enter Expiration Date
MMYY and press the green button.
30 | P a g e