Connecting Move/5000 Pinpad To Existing Wireless Network - Heartland Ingenico Move Manual

Connecting Move/5000 PINpad to Existing Wireless Network

Before starting this process, you must have the Move/5000 connected to a power source or fully charged. If the screen
turns off, select the green button on keypad to turn screen back on. (This only happens when the device isn't connected
to power source.)
1. With the PINpad powered on, touch the screen
to stop the screen saver, then press the ADMIN
button on screen.
2. Select Setup Menu (3).
6 | P a g e