Table of Contents
Advertisement
Configuring CRE/RPE for use with Global Payments EMV
You can configure CRE to communicate to the Pin Pad by following the step below.
1. Select the Manager or Options button
and enter the credentials if prompted.
2. Select Setup then, Setup Screen.
3. At the setup screen, select the Payment
Processing tab.
4. Select the Processing tab.
5. Select Credit/Debit.
6. Select Global Payments Canada from the
Payment Processor dropdown list.
7. Select TCP/IP under the Communication
Type section.
8. Enter the IP Address configured in
12
of the Connecting to Existing Network
section. Refer to the printout created
during that process.
9. Verify that the Port No. value matches
the port number set in
communications setup.
10. Press Update.
step
Step 7
of
17 |
P a g e
Advertisement
Table of Contents
