Getting Started: Steam Mode - Shark VAC-THEN-STEAM MV2010WM Owner's Manual

Getting Started: Steam Mode

1
ASSEMBLY
1 Attach a Steam Pad onto the bottom
of the Steam Frame, matching the
hook and loop fasteners.
2
Place the Steam Frame/Pad
assembly on the floor with the
magnetic connections facing up.
8 TOLL FREE: 1-800-798-7398
3
2
MAGNETIC
CONNECTIONS
3
Place the cleaning unit onto the
Steam Frame. THE UNIT MUST BE
UPRIGHT.
IMPORTANT: Steam Frame and pad
must be attached to the cleaning unit
in order to use the steam function.
1
FILLING THE WATER TANK
1 Keep the cleaning unit in the upright
position to add water. Remove
tethered cap from water tank.
2
Add water to the maximum fill line
using the included fill cup. Snap
water tank cover back into place.
English
Do not use chemicals or
detergents in your
Vac-Then-Steam. You only
need water to achieve
super-heated, sanitizing
steam.
2
NOTE: If you live in a hard water
area, we recommend using distilled
water in your Vac-Then-Steam.
www.sharkclean.com 9