Charging And Setup Instruction - MODSTER Spit Fire MK II User Manual

Manual
Charging Instruction
Setup Instruction
1. Install 4 AA batteries (not included) in the
transmitter.
3. Connect the battery to the receiver, then stick
the battery into the cabin.
www.modster.at
1. Unplug the battery from your plane.
2. Carefully plug the charger into the USB port on your computer or
USB adapter.
3. Connect battery into the charger.
4. The charging process takes about 3 hours. For safety reasons,
never charge the battery for longer than 4 hours.
While charging, the red LED indicator will be flashing.
When the charging is finished, the red LED will be off.
2. Plug the landing gears into the position on the
mainwing as shown above.
4. Setup is done. Make sure you read and follow
all instructions in this manual before start flying
the airplane.
Spit Fire MK II
MDX
5