Wiring; Gas Connection - Hisense GM642XS User Manuel

2.3.

Wiring

You should definitely use an earthed line for the product!
The manufacturing firm shall not be responsible for any damages
that may occur if the product is used without the earth.
Electric shock, short-circuit or fire risk arising from the installation
performed by any unprofessional persons! The product should be
connected to the mains only by an authorized and qualified person and
the warranty of the product starts only after correct installation.
Power shock, short-circuit or fire risk arising from damaged power
cable! The power cable should be crushed, crinkled or pinched or should
not contact with the hot parts of the product. If the power cable gets
damaged, it should be replaced by a qualified electrician.

The mains supply data should be same on the data indicated on the
nameplate of the unit. You may find the nameplate at the back of
or under the product.

The connection cable of the product should comply with the
technical specifications and power consumption.
Risk of electric shock! Before performing any work on the electric
installation, please disconnect the power supply of the product.
2.4.

Gas connection

Any work on the gas equipment and systems should be performed
by the qualified and authorized persons.
Prior to installation, make sure the conditions of local distribution (gas type
and gas pressure) comply with the settings of the product.
10