Necessary Procedure After Battery Change - Seiko 6M25 Instruction Manual

NECESSARY PROCEDURE AFTER BATTERY CHANGE

When the battery is replaced, the information stored in the IC does not correspond
with the time and date actually displayed. Before using the watch, therefore, be sure
to reset the hands and date, following the procedure below.
CROWN
B
A
20
Turn to set MODE INDICATOR to "CHRONO.".
* If the stopwatch is counting, first press Button B
to stop measurement and then press Button A to
reset the hands.
7
CROWN
CROWN
Pull out.
▼
Press and hold at the same time
B
A
AND
for 2 seconds.
* A beep sounds when the
▼
B
A
Press to stop the hands.
OR
▼
buttons are released, and the
h a n d s s t a r t t o s h o w
demonstration movement.