Notes On Operating The Watch - Seiko 6M25 Instruction Manual

NOTES ON OPERATING THE WATCH

*1 When a hand is selected, it will move back and forth and return to where it was.
When the date is selected, it will advance one day and return to the current date.
*2 The hand(s)/date move(s) quickly if the corresponding button is kept pressed for 2
seconds.
*3 As Minute hand moves, Hour hand also moves correspondingly.
*4 When setting Hour hand, check that AM/PM is correctly set.
• Press Button A to turn Hour hand past the 12 o'clock marker to determine whether the watch
is set for the A.M. or P.M. period. If the date changes, the time is set for the A.M. period. If
the date does not change, the time is set for the P.M. period.
While the date is changing, Hour hand stops on the 12 o'clock position even if Button A is kept
pressed.
*5 The alarm time can be set with the CROWN both at the normal position and at the
extended position.
*6 Alarm test: With the CROWN at "ALM.ON", press and hold Buttons A and B at
the same time.
*7 Remarks on timer operation:
In TIMER mode, Hour hand stops at the 12 o'clock position.
•
With each press of the buttons, a beep sounds for confirmation.
•
Even if the mode is changed from TIMER to another while the timer is counting
•
down, it continues counting. If the timer is stopped, however, the hands will be
reset to "0" position by changing the mode.
22