Table of Contents
Advertisement
Quick Links
PATIO QUARTZ HEATER
YP-2000B (842-123/842-123V01)
1-WARNINGS
■This electrical appliance complies with technical safety and electromagnetic
compatibility standards.
■ Never touch your heater when in operation (risk of burns).
■ Never touch it with wet hands.
■ Never rotate the heating part of the appliance during operation. To change the
tit angle of the heating part, we advise you to wait for 15 minutes after the appliance
has been switched off.
■ Never place anything on your heater's safety guard as this may cause
overheating (e.g. towels)
Never use your appliance to dry washing.
■
■ Although the heating element has stopped glowing, it may still be live and
potentially dangerous. Check that the selection indicator is in position off
before taking any action.
■ Switch off your appliance:
- After use
- In the event of malfunction
- Before cleaning it.
■ Never operate your appliance if it has fallen over.
Never dismantle your appliance. An incorrectly repaired appliance maybe dangerous
■
to the user. If you encounter any problems, please take it to one of the Approved
Service Centers in our customer service network
The warranty will be void in the event of damage arising from improper use.
Do not use this heater in the immediate surrounding of a bath, a shower or a
■
swimming pool.
Advertisement
Table of Contents
Related Manuals for Outsunny YP-2000B
Summary of Contents for Outsunny YP-2000B
- Page 1 PATIO QUARTZ HEATER YP-2000B (842-123/842-123V01) 1-WARNINGS ■This electrical appliance complies with technical safety and electromagnetic compatibility standards. ■ Never touch your heater when in operation (risk of burns). ■ Never touch it with wet hands. ■ Never rotate the heating part of the appliance during operation. To change the tit angle of the heating part, we advise you to wait for 15 minutes after the appliance has been switched off.
- Page 2 ■ This movable appliance is designed for use in gardens, and can be used indoor and outdoor. The warranty will not apply to appliances used for professional usage. Although the heater may be used outdoors, the main plug must only be connected to the supply indoors.
- Page 3 ■ The heater must not be located immediately below a socket-outlet ■ Do not use this heater with a programmer, timer or any other device that switches the heater on automatically, since a fire risk exists if the heater is covered or positioned incorrectly ■...
- Page 4 Fasten the four ST4*35mm screws into the plastic expansion screws one by one, make the 4-5mm of screws higher than metope. ( As shown below) E. Hold up the product to make the back of the product wall-mounted holes into the four corresponding screws which are Exposed on the wall.
- Page 5 F.In order to meet customer needs, the head of the product can be move up and down for 45-degree angle. ( As shown below) G.Please attention during installation: the distance between the top of the product and ceiling should be more than 0.5m, the distance between the side of the product and corner should be more than 0.5m, the distance between the bottom of the product and floor should be more than 2m.
- Page 6 H.For the safe use of the product, please install the product in correct installation method, never install the product inversely on the wall or be fixed on the ceiling. ( As shown below)
- Page 7 ■ Before installing your appliance, you must disconnect the electrical supply at the circuit breaker. ■ Use the four screws to fix the bracket of the heater on the wall on a right position and then fix the heater on the bracket. 5-OPERATION The appliance is switched on by means of the pull switch .
Need help?
Do you have a question about the YP-2000B and is the answer not in the manual?
Questions and answers