Table of Contents
Advertisement
Quick Links
XF, XP & XT Series
Flame Proof Camera Housings
Installation & Maintenance Instructions
The contents of this manual should be read and understood before attempting to connect or operate the
equipment. This manual should be kept for future reference.
This equipment shall be installed in accordance with the latest local/national codes of practice, and
standards e.g. UL 1203 Edn.5, CSA22.2 No30-M1986 Edn1 reaffirmed 2012, CSA C22.2 No25-1966
reaffirmed 2014, CSA C22.2 No 60065-03 Edn.1, UL60065 Edn.7
Whilst every effort has been made to ensure that all information in this document is correct at the time of
publication, due to our policy of continuous improvement, the company reserves the right to change any
OXALIS
Unit B Sutton Parkway
Oddicroft Lane, Sutton-in-Ashfield
NG17 5FB
& Pan Tilt Units
Class I Division 1 Group B, C, D
Class II Division 1 Group E, F, G
Class I Zone 1 IIB + Hydrogen
-60°C to +70°C
Class I Division 1 Group A, B, C, D
Class II Division 1 Group E, F, G
Class I Zone 1 IIC
-20°C to +70°C
File No. E477542
information contained herein without notice.
TM396 – XF-XP-XT LW UL ISS.A
Advertisement
Table of Contents
Related Manuals for Eaton OXALIS
Summary of Contents for Eaton OXALIS
- Page 1 OXALIS TM396 – XF-XP-XT LW UL ISS.A Unit B Sutton Parkway Oddicroft Lane, Sutton-in-Ashfield NG17 5FB XF, XP & XT Series Flame Proof Camera Housings & Pan Tilt Units Class I Division 1 Group B, C, D Class II Division 1 Group E, F, G Class I Zone 1 IIB + Hydrogen -60°C to +70°C...
-
Page 2: Table Of Contents
EATON Installation & Maintenance Instructions TM396 – XF-XP-XT LW UL ISS.A CONTENTS Amendment Record ............................3 General ..............................4 Description ............................5 Versions ............................5 Supplied Equipment ......................... 6 Recommended Tools ........................6 Recommended Spares ........................6 Installation ............................7 Unboxing &... -
Page 3: Amendment Record
EATON Installation & Maintenance Instructions TM396 – XF-XP-XT LW UL ISS.A Amendment Record Issue Date Details of Amendment 20/05/2021 First Issue P a g e... -
Page 4: General
3. A readily accessible disconnection device shall be incorporated in the electrical installation wiring, to provide all pole isolation of the supply to the equipment. 4. Only use tools and replacement parts supplied or recommended by EATON. This unit does not contain any user serviceable parts. -
Page 5: Description
EATON Installation & Maintenance Instructions TM396 – XF-XP-XT LW UL ISS.A Description The Series ‘X’ camera assemblies have been developed to meet the rigorous requirements of Flame proof and dust-ignition-proof electrical equipment for installation and use in hazardous locations found in the onshore and offshore, oil &... -
Page 6: Supplied Equipment
EATON Installation & Maintenance Instructions TM396 – XF-XP-XT LW UL ISS.A FOR DETAILED CONNECTION AND CONFIGURATION OF UNITS, THE INSTALLER SHOULD REFER TO INDIVIDUAL PROJECT SPECIFIC DRAWINGS AND INFORMATION. In addition to this manual there are various addendums available that cover the specific function of electronics that can be included within the camera assemblies. -
Page 7: Installation
Due care and attention must be taken to ensure enough clearance is allowed, to permit full rotation of the unit with its associated equipment; and that the moving unit cannot strike or make contact with personnel. It is strongly advised that the EATON range of mounting brackets are used. 3.2.1 Mounting the XP &... - Page 8 EATON Installation & Maintenance Instructions TM396 – XF-XP-XT LW UL ISS.A Fig.1 XP40VE Example XP Series unit showing base mount fixing points for an L-Body PTZ unit. Fig.2 BPW6500 Wall Mounting Bracket P a g e...
-
Page 9: Mounting The Xf Series
To gain flexibility of the cameras view direction one of the EATON range of fixing brackets is needed. These comprise of the BFP00SW Swivel joint (Fig 6), the BFW32SW (Fig 7) or a combination of the BFW5000 and BFP00SW. - Page 10 EATON Installation & Maintenance Instructions TM396 – XF-XP-XT LW UL ISS.A Fig.5 XF60VN Example XF Series unit showing mount plate fixing points Fig.6 BFP00SW Swivel Joint & Pole Top Adaptor Fig.7 BFW32SW Swivel Joint & Pole Top Adaptor 10 |...
-
Page 11: Accessory Installation
EATON Installation & Maintenance Instructions TM396 – XF-XP-XT LW UL ISS.A Accessory Installation 3.3.1 Sunshield Installation Depending on the model required, sunshields can be supplied uninstalled to prevent damage during shipping and unpacking. There is a protective plastic film that must be removed prior to installation. The correct sunshield fixings, for each model, are supplied with the camera system and should be positioned as detailed below. -
Page 12: Washer Nozzle Installation
EATON Installation & Maintenance Instructions TM396 – XF-XP-XT LW UL ISS.A 3.3.2 Washer Nozzle Installation A continuous rotation pan and tilt unit, if supplied with an external washer unit, is supplied with a washer nozzle and mounting bracket. If not already fitted, these should be fitted during installation with the supplied fixings and positioned to allow the cleaning fluid to reach the camera window when the wash command is sent. -
Page 13: Electrical Installation
EATON Installation & Maintenance Instructions TM396 – XF-XP-XT LW UL ISS.A Electrical Installation Electrical installation and servicing should only be carried out by qualified service personnel and in accordance with all local/national codes of practice and standards e.g. UL 1203 Edn. 5, CSA22.2 No30- M1986 reaffirmed 2014, CSA C22.2 No25-1966 reaffirmed 2014, CSA C22.2 No 60065-03 Edn. - Page 14 EATON Installation & Maintenance Instructions TM396 – XF-XP-XT LW UL ISS.A Fig.12 Gaining access to the XP & XT Base Unit Junction Box (Dual cable entry) Loosen the grub screw Before attempting to unscrew the cover. The 2x M5 Btn Hd Screws are to aid rotation of the cover.
-
Page 15: Xp & Xt Common Connection Examples
EATON Installation & Maintenance Instructions TM396 – XF-XP-XT LW UL ISS.A 3.4.2 XP & XT Common Connection Examples Always refer to project specific drawings and information 15 | P a g e... -
Page 16: Electrical Installation Xf Series Units
EATON Installation & Maintenance Instructions TM396 – XF-XP-XT LW UL ISS.A 3.4.3 Electrical Installation XF Series Units Cable entry type to the housing is via one ½”NPT entry at the side adaptor of the housing, or optionally via the three ¾”NPT cable entry end cover on the rear of the housing, solely for connection of power and signal wiring, no internal user wiring is allowed in this unit. -
Page 17: Xf Series Common Connection Examples
EATON Installation & Maintenance Instructions TM396 – XF-XP-XT LW UL ISS.A 3.4.4 XF Series Common Connection Examples Always refer to project specific drawings and information 17 | P a g e... -
Page 18: Maintenance
In atmospheres that have high levels of corrosive particles, the units should be cleaned every 3 to 4 months using only EATON recommended cleaning products and procedures. (contact EATON for details) EATON TAKES NO RESPONSIBILITY FOR OXIDISATION DUE TO A FAILURE TO COMPLY WITH THE CORRECT CLEANING PROCEDURES. - Page 19 EATON Installation & Maintenance Instructions TM396 – XF-XP-XT LW UL ISS.A Certification label IIB + Hydrogen Certification Label IIC Coding Class I Div 1 Group B, C, D Class II Div 1Groups E, F, G T135°C IP67 T Class T4, T5, T6...
-
Page 20: Specifications, Technical Data
EATON Installation & Maintenance Instructions TM396 – XF-XP-XT LW UL ISS.A Specifications, Technical Data Construction: Stainless Steel AISI 316L Ingress Protection rating: IP 66/7 Max Weight: Pan Tilt with housing: 33-45Kg depending on model Stand-alone housing: 12-22Kg depending on model...