Switch Key Functions - Delmhorst TechScan Owner's Manual

reference points against which subsequent readings are compared. One should not
expect that the reference scales for meters of different brands and types (resistance
/capacitance) will read alike on the same material. The benchmark may be different
from one meter type/brand to another because a given meters' response depends
on the material used for calibration and on the meter's range.

SWITCH KEY FUNCTIONS

1. On/Hold Key: Press to turn meter on, resume reading after checking calibration
or setting alarm, or hold current reading if pressed while reading. (There is a
slow beeping sound while holding a reading.)
2. Cal Check Key: Press and hold this key while in Read mode to check
calibration.
3. Scale Key: Press to select Wood scale or Reference scale.
Find Quality Products Online at:
3
GlobalTestSupply
www. .com
sales@GlobalTestSupply.com