Cleaning The Dust Container; Cleaning The Electrobrush - Miele Triflex HX1R Operating Instructions Manual

 To do this, line up the guides (arrows)
and turn the pre-filter back to its ori-
ginal position.
 Close the dust container flap, making
sure it clicks into place.
 Reattach the dust container to the
PowerUnit connector.

Cleaning the dust container

Clean the dust container as required.
 Remove the dust container.
 Empty the dust container over a bin
and lift the pre-filter upwards to re-
move it.
 Clean the dust container using water
and mild washing-up liquid.
 Dry the dust container thoroughly.
 Reinsert the pre-filter in the dust con-
tainer and turn the pre-filter back to
its original position.
 Reattach the dust container to the
PowerUnit connector.

Cleaning the Electrobrush

 Disconnect the Electrobrush from the
vacuum cleaner.
 Place the Electrobrush upside down
on a level, clean surface.
 Cut any threads or hairs that have
wound themselves around the roller
brush with a pair of scissors. To guide
the scissors, move along the guide
track on the roller brush.
Then run the vacuum cleaner to va-
cuum up the cut threads and hairs.
Maintenance
35