Cleaning The Dust Container - Miele Triflex HX1R Operating Instructions Manual


Risk of damage caused by
incorrect cleaning.
The pre-filter can become damaged
and be less effective as a result.
Do not clean the pre-filter with water.
Do not use pointed or sharp-edged
objects to clean the filter.
 Clean the pre-filter with the dusting
brush supplied or with a dry cloth.
 After cleaning the fine dust filter and
pre-filter, reinsert the former into the
latter by pressing the round cap on
top of the fine dust filter down as far
as it will go.
To continue achieving the best
possible cleaning results, replace the
fine dust filter (HX FSF-2) with a new
one after approx. 3 years.
 Reinsert the pre-filter in the dust
container.
 To do this, line up the guides (arrows)
and turn the pre-filter back to its
original position.
 Close the dust container flap, making
sure it clicks into place.
 Reattach the dust container to the
PowerUnit connector.

Cleaning the dust container

Clean the dust container as required.
 Remove the dust container.
 Empty the dust container over a bin
and lift the pre-filter upwards to
remove it.
 Clean the dust container using water
and mild washing-up liquid.
 Dry the dust container thoroughly.
 Reinsert the pre-filter in the dust
container and turn the pre-filter back
to its original position.
 Reattach the dust container to the
PowerUnit connector.
31