Battery Charging State Indicator (While Charging) - Miele Triflex HX1R Operating Instructions Manual

 Slide the PowerUnit of the fully as-
sembled vacuum cleaner, with the
battery inserted, down into the wall
bracket from above.
 Plug the charger into the power
socket.
The charging process will start.
Battery charging state indic-
ator (while charging)
The battery charging state is displayed
on the PowerUnit.
Installation and connection
Charging capacity
Approx. 0–34 %
Approx. 35–69 %
Approx. 70–90 %
Approx. 91–99 %
100 %
Once the battery is fully charged, the
battery charging state indicator
switches off to conserve energy.
If the battery has not been used for a
long time and has run down, it will go
into safe mode. As a result, the battery
charging state indicator will only re-
spond after approximately 30–60
minutes when charging in the
PowerUnit.
Display
Bottom light
flashes slowly
Bottom light is
lit up; middle
light flashes
slowly
Bottom and
middle lights are
lit up; top light
flashes slowly
Bottom, middle
and top lights
are lit up
Switches off
25