Operator Cushion Adjustment - Scag Power Equipment V-RIDE SVR61V-29FX Operator's Manual

R
Additional weight can be added to the front of the machine
if needed. See Figure 6-11.
1. Remove the front belt from the machine.
2. Remove the mounting hardware securing the
weight(s) to the front of the machine.
3. Add the desired weight to the machine and secure
using the recommended hardware. See Figure 6-11.
4. Reinstall the front belt cover.
1/2-13 ELASTIC
STOP NUT
Figure 6-11. Front Weight Adjustment
6.9

OPERATOR CUSHION ADJUSTMENT

The operator cushion can be mounted in twelve (12)
different positions to fit a wide range of operators. See
Figure 6-12.
1. Remove the hardware securing the operator cushion
to the mounting bracket and set the cushion aside.
2. Remove the hardware securing the mounting
bracket.
3. Install and secure the mounting bracket in the
desired operating location. Locations A, B or C for
lower mounting positions or rotate the mounting
bracket 180 degree and install in G for higher
mounting positions. See Figure 6-12.
4. Install and secure the operator cushion in the
desired location. Locations D, E or F for the lower
mounting positions or H, I or J for the higher
mounting positions. See Figure 6-12.
1 - WEIGHT FOR 48" / 52" / 61"
2 - WEIGHTS FOR 36"
3 - OPTIONAL FOR ALL MODELS
1/2-13 x 2-3/4" (ONE WEIGHT)
1/2-13 x 4-1/2" (TWO WEIGHTS)
1/2-13 x 5-1/2" (THREE WEIGHTS)
28
Section 6