Operator Cushion And Rear Cover Removal - Scag Power Equipment V-Ride II Operator's Manual

R
6.8 OPERATOR CUSHION AND REAR
COVER REMOVAL
The operator cushion and rear cover can be easily removed
to gain access to the machine for maintenance.
WARNING
Before removing any guards, shut the engine off
and remove the ignition key. Wait for all moving
parts to come to a complete stop before beginning
work.
To remove the operator cushion and rear cover:
1. Loosen the two (2) wing nuts securing the operator
cushion to the machine. See Figure 6-12.
2. Lift upward to remove the operator cushion. See
Figure 6-12.
3. Remove the two (2) wing nuts securing the rear
cover to the back of the machine and remove the
cover. See Figure 6-12.
WARNING
Do not operate the machine without the operator
cushion or rear cover installed.
2
1
Figure 6-12. Operator Cushion and Rear Cover
30
Section 6
1
3
3
Removal