Setting The Buzzer; Clock Adjustment - Sanyo SRT-2400 Instruction Manual

SETTING THE BUZZER

A buzzer can be set to sound during alarm recording, if
during recording the tape reaches the end, if buttons are
pressed or if there is a mechanical failure that causes the
tape to stop or be ejected, etc.
1
Press the MENU button until the (SET UP 2) menu is
displayed.
@@@@@@@<SET@UP@2>
*DISPLAY
@@@DATE@@@@@@@@@@@Y
@@@TIME@@@@@@@@@@@Y
@@@ALARM@COUNT@@@@Y
@@@SPEED@@@@@@@@@@Y
*BUZZER
@@@ALARM@IN@@@@@@@Y
@@@TAPE@END@@@@@@@Y
@@@KEY@IN@@@@@@@@@N
@@@WARNING@@@@@@@@Y
2
Press the ] button, until the desired item for which
the buzzer function will be set is flashing.
3
Press the l (or j) button to set "Y" for the functions
described below.
ALARM IN . . . The buzzer will be heard during
alarm recording.
TAPE END. . . The buzzer will be heard when
the end of the tape is reached
during recording. To stop the
buzzer, press the STOP, EJECT,
FF, REW or PLAY button.

CLOCK ADJUSTMENT

When using 2 or more VCRs of this same model, the
clock on the second VCR and on, can be synchronized
with the clock on the first VCR, using the CLOCK
ADJUSTMENT function.
To use CLOCK ADJUSTMENT function, "INPUT
OUTPUT" in the (SET UP 5) menu must be set to
"CLOCK SET".
1
Connect the ALARM OUT/CLOCK OUT terminal on
VCR 1 to the ALARM IN/CLOCK IN terminal on VCR
2.
2
Repeat the procedure for all the other VCRs,
connecting the ALARM OUT/CLOCK OUT terminal
on VCR 2 to the ALARM IN/CLOCK IN terminal on
VCR 3, and so on.
3
Press the MENU button until the (SET UP 3) menu is
displayed.
4
Press the ] button, until the "EXT TIME ADJ." setting
is flashing.
5
Press the l (or j) button to set the hour at which the
adjustment will be conducted.
NOTES:
Be sure to set the same time on all the VCRs.
The clock adjustment cannot be set to "00:00".
KEY IN . . . . . . The buzzer will be heard when
WARNING . . . The buzzer will be heard if the
4
Press the PAUSE/SEARCH button to save the setting.
NOTES:
If "N" is set, the buzzer will not be heard.
During timer recording mode, security lock engaged
mode and alarm recording mode, the buzzer will not be
heard when a button related to one of these modes is
pressed, even if "Y" is set for the "KEY IN" item.
@@@@@@@<SET@UP@3>
*ALARM@MODE@@@@@@@Y1
*ALARM@SPEED@@@@@@8H
*ALARM@DURATION@@@20S
*VERTICAL@SYNC@@@@Y
*EXT@TIME@ADJ.@@@@03:00
*TAPE@IN@MODE@@@@@STOP
*TAPE@END@MODE@@@@REW
*TAPE@END@OUT@@@@@-3M
*CLOG@DETECT.@@@@@Y
*SERIES@REC@IN@@@@N
6
Press the PAUSE/SEARCH button to save the setting.
The setting procedure on the first VCR is now
°
completed.
7
Repeat the procedure for all the other VCRs, setting
"EXT TIME ADJ." (to the same time as set on the first
VCR).
NOTES:
Connect the COM terminal on all VCRs used.
This function will not operate on the day the daylight
saving/standard time is changed.
36
one of the VCR buttons is
pressed.
heads are dirty and recording
qualtiy deteriorate, or if the tape
stops or is ejected due to a
problem with the internal
mechanism. To stop the buzzer,
press the STOP button.
Example
English