Sanyo SRT-2400 Instruction Manual page 33

SERIES RECORDING
Continous Loop Recording Setup
A minimum of 2 units are required for continuous loop
recording.
Example with 2 VCRs.
Under loop recording when the recording finishes on the
first unit, the new recording will start on the second unit.
When the recording finishes on the second unit, recording
will start on the first unit.
1
The SERIES OUT/CLOCK OUT terminal of VCR
No.2 and the SERIES IN terminal No.1 should be
connected (See diagram).
2
Set the following items as indicated.
Item
Cassette tape
Operation mode
"TAPE END MODE" (in
(SET UP 3) menu)
"SERIES REC IN" (in
(SET UP 3) menu)
"OUTPUT" (in (SET UP
5) menu)
Security lock
3
Press the REC button on VCR No.1.
° Recording will start in series recording mode.
4
Set the security lock on VCR No.1.
Loop recording connection (example with 2 VCRs)
VCR No.1 VCR No.2
Loaded Loaded
Stop Stop
REW REW
Y (YES) Y (YES)
SERIES SERIES
Canceled Set
NOTES:
To avoid recording problems, the "TAPE END MODE"
in (SET UP 3) menu should be set to "REW" for both
units.
In loop recording mode, the tape will be re-recorded
over. If you need to keep the recorded infomation,
please eject the tape after recording is complete and
insert a new tape.
ALARM IN/
CLOCK IN COM