Sanyo SRT-2400 Instruction Manual page 30

Sanyo real time video cassette recorder instruction manual srt-2400
Table of Contents

Advertisement

PROGRAM TIMER RECORDING
Setting the Holidays
By setting the holidays, timer recording will be conducted
on those days, as set for Sundays.
1
Press the MENU button until the (HOLIDAY SET)
menu is displayed.
@@@@@<HOLIDAY@SET>
@@1@@-----@@@11@@-----
@@2@@-----@@@12@@-----
@@3@@-----@@@13@@-----
@@4@@-----@@@14@@-----
@@5@@-----@@@15@@-----
@@6@@-----@@@16@@-----
@@7@@-----@@@17@@-----
@@8@@-----@@@18@@-----
@@9@@-----@@@19@@-----
@10@@-----@@@20@@-----
2
Press the l (or j) button to set the month of the
holiday, then press the * button.
3
Press the l (or j) button to set the day of the holiday.
4
Press the * (or ]) button until the next line to set
start flashing.
Repeat steps 2 to 4 to set up to 20 holidays.
°
5
Press the PAUSE/SEARCH button to save the
settings.
NOTE:
If setting holidays, be sure that a timer recording is set
for Sunday. If not, this function will not operate.
If a timer recording for Sundays is entered, the holidays
timer recording will not function if the program timer
recording mode is set to "N".
To erase a setting, follow the same procedure as
above, but at step 2 and 3, enter "--" instead of a
setting.
English
Changing a Program Timer Recording
1
Press the MENU button until the (TIMER SET) menu
is displayed.
2
Press the * (or ]) button until the setting to correct is
flashing.
3
Press the l (or j) button to correct the setting.
4
Press the PAUSE/SEARCH button to save the
settings.
5
Press the TIMER button.
To Cancel a Program Timer Recording
1
Press the MENU button until the (TIMER SET) menu
is displayed.
2
Press the * (or ]) button until the "Y" corresponding
to the timer recording to cancel is flashing.
3
Press the l (or j) button to select "N".
4
Press the PAUSE/SEARCH button to save the
settings.
5
Press the TIMER button.
To Cancel all Program Timer Recordings
1
Press the MENU button until the (TIMER SET) menu
is displayed.
2
Press the MENU RESET button.
All programmed timer recordings are erased.
°
3
Press the PAUSE/SEARCH button, the normal
screen is displayed.
29

Advertisement

Table of Contents
loading

Table of Contents