Casio Privia PX-800 User Manual page 41

3.
With the speaker box C laying on its side as
shown in the illustration, secure side panels
A and B to the speaker box C. Secure the
side panels using four screws D.
• Align the screw holes of the speaker box C with the
screw holes of the side panels as you install the
screws D.
• Partially tighten the screws on one side of the speaker
box C and then fully tighten the screws on the other
side.
• Next, fully tighten the screws that you partially
tightened.
A
D
• You can also install the speaker box C so it faces
towards the back of the stand.
4.
After ensuring that all of the screws are fully
tightened, remove the packing material and
stand up the stand.
• Cover each of the eight side panel screws with screw
caps E.
E
B
D
C
E
• Insert screw caps at the locations indicated in the
illustration and press them in as far as they will go.
5.
Attach the brackets I to the pedal unit F,
and temporarily secure them with screws G.
G
I
-(a) F
I
-(b)
6.
Remove the screws that hold the corner
brackets in place on the back corners (the
corners away from the pianist) of the side
panels.
Assembling the Stand
G
E-37