Formatting An Sd Memory Card - Casio Privia PX-800 User Manual

5.
Use the + and – buttons to select the file
number where you want to save the song
data.
This mark indicates that the currently displayed song number
has data stored already.
6.
When everything is the way you want, press
the TEMPO/SETTING button to begin saving
data.
• The message "CPL" (ComPLete) will appear on the
display to let you know when the save operation is
complete.
To interrupt an ongoing save operation, press the
CARD button.
If the SD memory card already contains a data file
with the same file number, pressing TEMPO/
SETTING in step 6 will display "rEP" (rEPlace) to
confirm that you want to replace the existing file
with the file you are saving. Press the
to replace the file.
• To cancel the operation, press the
place of the /YES button.
Formatting an SD Memory
Card
Use the procedures in this section to format an SD
memory card.
IMPORTANT!
• Before performing the procedure below, check to make
sure that the SD memory card does not contain any data
you might need.
• The SD memory card format performed by your digital
piano is a "quick format". If you want to completely delete
all of the data on the card, format it on you computer or
using some other device.
PREPARATION
• Insert the SD memory card you want to format into the
digital piano's SD memory card slot. Make sure that the
write-protect switch of the SD memory card is not in the
write-protect position.
1.
While holding down the TEMPO/SETTING
button, press the CARD button. Keep the
TEMPO/SETTING button depressed until you
finish step 2 of this procedure.
• This will cause "For" (Format) to appear on the
display.
2.
3.
/YES button
/NO button in
Press the /YES button to start formatting.
• "PLS" (PLeaSe wait) remains on the display while the
formatting operation is performed. Never try to
perform any other operation on the digital piano
while the memory card is being formatted. The
message "CPL" will appear on the display to let you
know when the format operation is complete.
To cancel the format operation, press the
button in place of the
Release the TEMPO/SETTING button to
complete the formatting procedure.
• This causes the indicator lamp above the button to
turn off.
Using an SD Memory Card
/NO
/YES button.
E-33