Indicators And Projector Condition - Sanyo PLC-XTC50AL Owner's Manual

Appendix

Indicators and Projector Condition

Check the indicators for the projector condition.
The projector is operating normally .
Indicators
WARNING
POWER
TEMP .
green / red
red
✽
red
✽
green
✽
green
✽
red
✽
red
✽
green
✽
red
✽
green
✽
✽
Fig .1 Filter replacement icon and "Please wait... "
• • • on
• • • off
74
WARNING LAMP 1/2
SHUTTER
FILTER REP .
blue
orange yellow
✽ ✽ ✽
✽
✽
✽
✽
✽
✽
✽
✽
✽
✽
✽
✽
✽
✽
✽
✽
✽
• • • blinking at the normal rate
(approx. 1 second ON,
1 second OFF)
• • •blinking fast
(approx. 0.5 seconds ON,
0.5 seconds OFF)
Projector Condition
The projector is off. (The AC power cord is unplugged.)
The projector is in stand-by mode. Press the ON/STAND-
BY button to turn on the projector.
The projector is operating normally.
(The Shutter is open)
The projector is operating normally.
(The Shutter is closed)
The projector is preparing for stand-by or the projection
lamp is being cooled down. The projector cannot be
turned on until cooling is completed and the POWER
indicator lights red.
The projection lamp is being cooled down in the Power
management mode.
The projector is in the Power management mode.
The projection lamp is being cooled down in the Shutter
management mode.
The projector is in the Shutter management mode. Press
the ON/STAND-BY button to turn on the projector.
The filter is scrolled using the Filter control function in the
setting menu. When the filter is being scrolled, the Filter
replacement icon and " Please wait... " message (Fig. 1)
appear on the screen.
✽
• • • blinking slow
(approx. 2 seconds ON,
2 seconds OFF)
• • • Differs according to conditions.