Connecting For Audio Signal - Sanyo PLC-XTC50AL Owner's Manual

Installation

Connecting for Audio Signal

Cables used for connection
• Audio Cable (Mini Plug [stereo] x 2)
• Audio Cable (RCA x 2)
(Cables are not supplied with the projector.)
Audio cable
(RCA)
✔Notes:
• When the AUDIO OUT is plugged-in, the projector's built-
in speaker is not available.
• When the Standby mode is set to "Eco" in the Setting,
MONITOR OUT and AUDIO OUT are disabled. (p.55)
22
Audio Output
Audio cable
(stereo)
AUDIO IN
MONITOR OUT and AUDIO OUT Specifications
Selected MONITOR OUT
Input Terminal
Input 1 Input 1(D-Sub)
Input 2 Input 2(5-BNC)
Input 3 Input 1 or Input 2 *
Network Input 1 or Input 2 *
* Between Input1 and Input2, the last selected
Input is output to MONITOR OUT terminal.
External Audio Equipment
Audio Input
Audio cable
(stereo)
AUDIO OUT
(stereo)
Unplug the power cords of both the projector
and external equipment from the AC outlet
before connecting cables.
AUDIO OUT
Terminal
Input 1
Input 2
Input 3
NIL