Sanyo PLC-XTC50AL Owner's Manual page 44

Image Adjustment
Reset
To reset the adjusted data, select Reset and press the
SELECT button. A confirmation box appears and then select
[Yes]. All adjustments will return to their previous figures.
Store
To store the adjusted data, select Store and press the
SELECT button. Use the Point
from Image 1 to 4 and press the SELECT button.
A confirmation box appears and then select [Yes]. Stored
data can be called up by selecting an "Image (1–4)" in the
Image Level Selection on page 41.
Quit
Exit the Image Adjust Menu.
44
buttons to select one
ed
Image Level Menu
Move the red frame
pointer to an image
item to be set and
then press the
SELECT button.
Store icon
A confirmation box
appears and then
select [Yes].