I
NSTALLATION
*This input is a optional connection for "TL" models. This input is programmable
and may need to be programmed for Tachless operation. See Page 11.
Note: The center pin of this connector is low current and designed to power a Voltage
Inverter. Do not use the center pin of this connector to power relay packs. Doing so will
damage the output. *Always use a fused power source when installing relays for keyless
entry.
ACTIVE RF ANTENNA
**The antenna must be connected before the system will operate
The jumpers control the output on the white wire from the
six pin harness. Place the jumpers in the above order to
change the output.
Note: The default setting is second ignition.
G
All manuals and user guides at all-guides.com
UIDE
Program Button
Status Led's
WIRING DIAGRAM
YELLOW
RED/WHITE
BROWN
ORANGE
WHITE/BLUE
BLACK/WHITE
PURPLE
WHITE
GREEN/WHITE
GREEN
BLACK
PINK
BLUE/WHITE
BLUE
Jumpers
3