Assigning Different Tones To The Left And Right Sides Of The Keyboard; Using Tone Effects - Casio Privia PX-110 User Manual

After you are finished using the layered
2
tones, press the one of the TONE buttons
again to unlayer them.
Adjusting the Volume Balance between
Two Layered Tones
While holding down the FUNCTION
1
button, use the keyboard keys shown below
to adjust the volume of the layered tones.
L L L L
C C C C
1 2 3 4
Initial default (Center)
Volume of the layered tone
• To return the volume setting to its initial default,
hold down the FUNCTION button and press
both of the keys at the same time.
Assigning Different Tones to the Left
and Right Sides of the Keyboard
You can assign different tones to keys on the left side
and the right side of the keyboard.
Split Point
Low Range
STRINGS
Press the TONE button of the tone you want
1
to select for the high (right) range.
Example: GRAND PIANO 2
Press the SPLIT button.
2
• This causes the SPLIT indicator lamp to light.
Press the TONE button of the tone you want
3
to select for the low (left) range.
• The keyboard is now split between the two
tones.
Example: STRINGS
After you are finished using the split
4
keyboard, press the SPLIT button again to
unsplit it.
• This causes the SPLIT indicator lamp to go out.
404A-E-009A
L L L L
C C C C
5 6 7 8
Volume of the main tone
High Range
GRAND PIANO 2
Playing with Different Tones
Specifying the Keyboard Tone Split Point
While holding down the SPLIT button,
1
press the keyboard key where you want the
left limit of the high range (right) tone to
be.
Flash
Low range
NOTE
• The split point setting also controls the point where
the keyboard splits between the accompaniment
keyboard (pages E-12, 13) and the melody
keyboard. Moving the split point also affects the
sizes of the accompaniment keyboard and the
melody keyboard.

Using Tone Effects

Reverb: Makes your notes resonate
Chorus: Adds more breadth to your notes
Turning Effects On and Off
Each press of the REVERB or CHORUS
1
button toggles the setting as shown below.
• You can determine the status of the effects by
checking the REVERB and CHORUS indicator
lamps.
Lit
Unlit
Left limit of the high range
High range
On
Off
E-7