Layering Two Tones; Assigning Different Tones To The Left And Right Sides Of The Keyboard - Casio Privia PX-100 User Manual

Layering Two Tones

Use the following procedure to layer to two tones, so
they sound at the same time.
Simultaneously press the TONE buttons of
1
the two tones that you want to layer.
Example: Press GRAND PIANO 2 button and
STRINGS button at the same time.
GRAND PIANO 2
STRINGS
• The tones are now layered.
After you are finished using the layered
2
tones, press the one of the TONE buttons
again to unlayer them.
Adjusting the Volume of Layered Tones
While holding down the CONTROL
1
button, use the keyboard keys shown below
to adjust the volume of the layered tones.
–
+
L L L L
C C C C
1 2 3 4
+ : Raises the volume
– : Lowers the volume
412A-E-009A
L L L L
C C C C
5 6 7 8
Playing with Different Tones
Assigning Different Tones to the Left
and Right Sides of the Keyboard
You can assign different tones to keys on the left side
and the right side of the keyboard.
Split Point
STRINGS
Press the TONE button of the tone you want
1
to select for the high (right) range.
Example: GRAND PIANO 2
Press the SPLIT button.
2
• This causes the SPLIT indicator lamp to light.
Press the TONE button of the tone you want
3
to select for the low (left) range.
• The keyboard is now split between the two
tones.
Example: STRINGS
After you are finished using the split
4
keyboard, press the SPLIT button again to
unsplit it.
• This causes the SPLIT indicator lamp to go out.
NOTE
You can also perform a kind of "quick split" operation
using the following key operations.
• Press the SPLIT button.
➠ Acoustic Bass (built-in tone)
• Hold down the CONTROL button and press the
SPLIT button.
➠ Ride Aco Bass (built-in tone)
GRAND PIANO 2
E-7