Recording Your Keyboard Play
You can record to either track with or without playback
of the other track.
To record to one track without playing
back the other
When recording a different tune to Track 2 after
recording to Track 1, make sure you carefully read the
notes under steps 1 and 2 before actually performing
the steps.
Press the SONG MEMORY button so the
1
PLAY indicator lamp is lit.
• Select the tone and effects you want to use in
your recording, and configure the tempo and
beat settings.
NOTE
• If you are recording a different tune to Track 2 after
recording to Track 1, press the LEFT/TRACK 1
RIGHT/TRACK 2 button to turn off the L/T1
indicator lamp.
Unlit
Press the SONG MEMORY button so the
2
REC indicator lamp is flashing.
• At this time the LEFT/TRACK 1 indicator lamp
should also be flashing. This indicates that the
piano is standing by for recording to Track 1.
404A-E-019C
Recording to and Playing Back from Song Memory
Lit
NOTE
• If you want to record to Track 2, press the LEFT/
TRACK 1 RIGHT/TRACK 2 button here. This will
cause the RIGHT/TRACK 2 indicator lamp to flash,
which indicates that the piano is standing by for
recording to Track 2.
• If you want to use the metronome during
recording, press the METRONOME button to
start it.
• If you want to use a rhythm and/or auto
accompaniment during recording (to Track 1
only), select the rhythm and chord mode.
Start playing something on the keyboard.
3
• This will automatically start recording.
• Actually, there are a variety of different ways
to start the record operation. See "Starting the
Record Operation" below for more information.
When you are finished, press the START/
4
STOP button to stop recording.
• If you are using a rhythm, you can stop
recording with an ending pattern by pressing
the INTRO/ENDING button.
• Stopping recording causes the REC indicator
lamp to go out, and indicator lamp above the
button of the track to which you recorded to
light.
• To play back the track you just recorded, press
the START/STOP button again.
After you are finished recording or playing
5
back, press the SONG MEMORY button so
the PLAY lamp or REC lamp turns off.
Starting the Record Operation
You can use any of the following methods to start a
record operation in step 2 of the above procedure.
I When recording to Track 1 with rhythm or auto
accompaniment
• Press the START/STOP button to start recording.
• Press the SYNCHRO/FILL-IN button to put the
piano into synchro start standby. Recording will
start when you finger a chord in the
accompaniment range of the keyboard.
• Press the INTRO/ENDING button to put the
piano into synchro start standby. Recording will
start and an intro pattern will play when you
finger a chord in the accompaniment range of the
keyboard.
E-17