Layering Two Tones; Splitting The Keyboard Between Two Different Tones - Casio LK-270 User Manual

Controlling the Keyboard Sounds

Layering Two Tones

You can use the following procedure to layer two different
tones (such as piano and strings) so they sound
simultaneously when you press a keyboard key.
1.
Select the first tone you want to use.
bp
Press and then use
want.
Example: 021 ELEC.PIANO 1
E . P i a n o 1
2.
cq
Press .
3.
bs
Use (10-key) to select the second tone you
want.
Example: 175 STRINGS
S t r i n
4.
Play something on the keyboard.
Both tones sound at the same time.
5.
cq
Pressing again to unlayer the keyboard (so it
plays only the tone you selected in step 1).
cq
• Each press of toggles between layered (two tones)
and unlayered (one tone).
E-14
bs
(10-key) to select the tone you
Lights
s
g
Disappears
Splitting the Keyboard between
Two Different Tones
You can use the procedure below to assign different tones to
the right range and left range of the keyboard, so it sounds
like you are playing an ensemble between two instruments.
To select the two tones for a split keyboard
1.
Select the tone for the right side range (page
E-13).
bp
Press and then use
want.
Example: 273 FLUTE 1
F l u t e 1
2.
cp
Press .
3.
bs
Use (10-key) to select the left side range tone
you want.
Example: 046 VIBRAPHONE 1
V i b e s 1
4.
Play something on the keyboard.
This will sound the tones assigned to the left and right
side ranges of the keyboard.
VIBRAPHONE 1
Split point
F3
bs
(10-key) to select the tone you
Lights
FLUTE 1